Xpelair 340 Manuel d'utilisateur télécharger pdf

Xvent multipoint ventilation units

Xvent 340 range

Information on Maintenance and Operation

For the Householder

Your home has been fitted with a mechanical ventilation system. The system should consist of a central

mechanical extract fan, ducting, an external exhaust and extract valves in all the wet rooms e.g. the

kitchen, bathroom and toilet. The proper working of the system will provide a healthy indoor atmosphere

and will help eliminate condensation.

The Xvent 340 / Xvent 340DC system is (or can be) fitted with a 3-position switch, while the Xvent

340DCRF system is used in conjunction with a three speed wireless transmitter to set 3 different running

speeds. The high speed setting is a boost position for the extract of cooking smells or moisture-laden air,

when this is in use it is advisable to open window vents or a window to provide replacement air.

The middle position would be the normal running position in a house with the low speed position as a

background position if the house is not fully occupied. In a smaller dwelling or flat the low speed position

could be the normal running position with the middle position as a boost.

The fan is designed to run continuously 24 hours a day. It is fitted with an energy efficient electric motor.

Maintenance

In normal running the design of the fan attracts very little dirt. It may be advisable to have the unit

inspected by your installer once every 4 or 5 years and cleaned if necessary.

For the Installer

If you have any queries before installing these products or after they are installed call the Xpelair

Technical Hotline +44 (0) 8709 000430. Our engineers are there to help during normal office hours

(UK only) and may be faxed at all other times on + 44 (0) 8709 000530.

Customers outside the UK please contact your local Xpelair distributor, details of which are

available from the UK office.

Characteristics

The electric motor and fan are enclosed in the ventilator housing. Attached to the casing are 4, 125 mm

diameter spigots for ductwork connections, 3 for extract ductwork and one common spigot to take the

waste air to atmosphere.

1 2 3 4 5

Xvent 340 range 1

Résumé du contenu

Page 1 - Xvent 340 range

Xvent multipoint ventilation units Xvent 340 range Information on Maintenance and Operation For the Householder Your home has been fitted w

Page 2

Installation The installation should minimise resistance and prevent any leakage in the ducting. Where possible the use of flexible ducting should

Page 3

Wiring Instructions • This appliance is intended for connection to fixed wiring • Check that the electrical rating shown on the fan matches the mai

Page 4

OPERATION: The RF system (Radio Frequency) is an installation technique that does not use any wiring between the control point(s) and the receiver.

Page 5

Technical advice and service Applied Energy Products LtdMorley WayPeterboroughPE2 9JJt 01733 456789f 01733 310606www.applied-e

Commentaires sur ces manuels

Pas de commentaire

Xpelair 340 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Ventilateurs des ménages Xpelair 340. Xpelair 340 User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Ventilateurs des ménages Xpelair 340